HY-A6 blow molding machine, high speed liner

Model Number: HY-A6 Brand Name: Goldsan, OEM Key Specifications/Special Features: Description:HY-A6 is the fastest liner blow molding machine in mainland of China by now. HY-A6 reaches around 4800BPH for 350ML bottle. Its baking tunnel is separated from the blow station so that time for mold opening is shortened with a result of speedy blowing and high output, damage to machine is lessened so as to keep reliable performance and prolong service life, as well as machine runs more smoothly and steadily.HY-A6is controlled by PLC. The whole process from preform feeding to bottle discharging is completed automatically with advantages of labor saving and no pollution. HY-A4 consists of three main parts: preform loading system, Heater channel & blow station.Machine features：

• Machineuse of advanced PLC control system, stable in performance, automatic preform feeding.
• Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater
• High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
• High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
• No contamination and low noise with the air cylinder to drive the action instead of the oilpump.
• Air route design is divide into two parts ,
• Ideal effect of the chilling with the chilling system
• Low rejection rate: less than 0.3percent

ItemunithY-A4
Machine
Clamping forceKn2000
Clamping strokemm230
Stretching strokemm370
Bottom strokemm70
Number of cavitiesCavity4

Container
Max. Container volume ltr2.0L
Neck diameter mm 28MM, 30MM, 38MM, 48MM
Max .container diameter mm200
Max. container height mm330
Theoretical output bph3000-4000
Electrical system
Total powerKW30
Heating power KW28
Power supply 3phase 220-380V/50-60Hz
Power consumption KW/H18 (0.5L)

Air system operating pressure 0.8 mpa
Low pressure consumption L/min1000（0.5L）
Blowing pressure Mpa3.0
Highpressure consumption L/min2000（0.5L）
Machinesize main machine (L×W×H) cm350*205*205
Preform auto-loader 115*95*185cm
Machine weight 2500 Kg